Insulated Spanish shutter window
Door specifications
- The slide is made of aluminum insulated with polyethylene and coated with powder coated paint according to the desired color.
- The height of the slide is 40 mm and the thickness of the aluminum is 0.35 mm. It is attached to a plastic end that allows easy movement of the net without greasing. It is attached to the slide at the end of the shutter with T rubber to seal the shutters and prevent insects from entering. Under it.
- The side channels are made of aluminum, painted with powder coated paint according to the desired color, 1.5 mm thick and 60 mm wide, with G Rubber installed on its sides to protect the shutters from friction with the side channels when moving up and down.
- The box is made of aluminum, painted with powder coated paint according to the desired color, and its area is proportional to the diameter of the upper roll of the shutter
- The sides of the shutters are sealed with the walls with silicone.
- The motor is French, made by Sunfi, and is compatible with the measurements of the windows.
- It is installed inside a galvanized iron pipe whose diameter matches the diameter of the motor and the width of the box.
- The operating key is a single key equipped with 3 up, down and off movements, brand Sunfi, for shutters.
- In the case of operating the shutters with a remote control, a signal receiver (receiver) and a Sunfi remote control are added and connected to the motor.
