Shower Door Mesh Sea Wave
Door specifications
- It is made of galvanized iron pipes connected together in the shape of a “sea wave” with a thickness of 1.4 mm.
- The door is suspended using a 6-inch diameter pipe to transmit the motor movement to the door as it rises and falls.
- The side channels are made of iron, 10 cm deep and 2.5 cm wide.
- Fixing the side channels to the wall using iron tubes 5 cm x 10 cm.
- The door is fixed from above with strips of galvanized iron 1 mm thick
- The end of the door is made of slats with a thickness of 1 mm, with the appropriate rubber installed at the bottom to seal the door.
- The motor is Chinese, Jiulong brand, with a load capacity of 1 ton and operation with a start switch.
- The ability to convert the machine to operate manually and lift the door easily using an iron chain.
